• Manual
  • Video gallery
  • Downloads
  • Software updates

Manual

Charging hybrid battery

Charging status in the instrument panel

Charging status is indicated in the instrument panel using both graphics and messages. This information is displayed as long as the instrument panel is active.

Opening and closing charging socket cover

The cover for the hybrid batteries' charging socket opens manually.

Charging status in the vehicle's charging socket

The charging status is indicated by an LED light in the charging socket.

Charge cable

The charging cable is used to recharge the vehicle's hybrid batteries.

Ground fault breaker in charging cable

The charging cable has a circuit breaker that helps protect against current overloads and thermal overheating.

Charging status in the charging cable's control module

The indicator on the charging cable's control unit shows the status of ongoing charging, as well as status after completed charging.

Temperature monitoring of the charging cable

To help ensure the vehicle's hybrid batteries are reliably charged each time they are connected, charging is stopped if the temperature in the charging cable becomes too high and reaches a critical limit.

Charging of the hybrid batteries

In addition to a conventional fuel tank, the vehicle is also equipped with two rechargeable lithium-ion hybrid batteries.

Initiating charging of the hybrid batteries

When charging using AC current, only use the charging cable provided with the vehicle or a replacement cable recommended by Polestar.The vehicle's hybrid batteries are charged using the charging cable between the vehicle and a 120/240 V outlet (alternating current) or charging station (mode 3).

Stopping charging of the hybrid batteries

To stop charging of the hybrid battery, unlock the vehicle, unplug the charging cable from the vehicle's charging socket and then unplug the cable from the 120/240 V outlet (alternating current).

Charging output

Charging output is used to charge the hybrid batteries and precondition the vehicle. Charging is performed by connecting a charging cable between the vehicle's charging socket and a 120/240 V electrical socket (alternating current) or via a charging station.